当前位置:首页-新闻动态 > 行业资讯 >

彩钢瓦不同承重的屋面安装!

来源:http://www.jnqkgjg.com 日期:2018-12-31 发布人:admin

彩钢瓦钢架或屋架、檩条和屋面板作为彩钢屋面重要的组成部分。彩钢板的安装方式与钢架或屋架、檩条和屋面板的承重直接有重要关系。

Color steel tile steel frame or roof truss, purlin and roof panel are important components of color steel roof. The installation method of color steel plate is directly related to the load-bearing of steel frame or roof truss, purlin and roof panel.
各种连接件、紧固件的数量和尺寸可通过静力计算分析和设计构造求得。
The number and size of various connectors and fasteners can be obtained by static calculation, analysis and design.
1)彩钢瓦钢架或屋架、檩条均能满足设计要求且屋面板钢度较大时,这种方式是比较合理的安装条件,光伏支架采用连接件与屋面板连接,并尽可能靠近檩条位置固定。
1) When the color steel tile steel frame or roof truss and purlin can meet the design requirements and the roof slab is of high rigidity, this method is a more reasonable installation condition. The photovoltaic support is connected with the roof slab by connectors and fixed as close as possible to the purlin position.
2)彩钢瓦钢架或屋架、檩条均能满足设计要求,但屋面板钢度较小,变形较大时,这种类型的彩钢屋顶主要表现为车棚、公交候车厅、养殖场等一些要求程度不太高的场所。
2) The color steel tile steel frame or roof truss and purlin can meet the design requirements, but when the roof slab is small and the deformation is large, this type of color steel roof is mainly manifested in some places where the requirements are not very high, such as car shed, bus waiting hall, farm, etc.
彩钢瓦
Color steel tile
光伏支架可采用连接件直接与檩条处的屋面板直接连接方式,也可以采用连接件与檩条通过穿透屋面板的方式进行连接。
The photovoltaic support can be directly connected with the roof panel at purlin by connecting parts, or can be connected by connecting parts and purlin through the roof panel.
3)彩钢瓦仅钢架或屋架能满足设计要求,檩条及屋面板承载能力较小时,此种布置方式,采用连接件与钢架或屋架连接,具体连接安装方式同支架与檩条穿透屋面板连接方式。
3) When the steel frame or roof truss can only meet the design requirements and purlin and roof slab have small bearing capacity, this arrangement adopts the connection between connectors and steel frame or roof truss, and the specific connection and installation method is connected with the support and purlin through roof slab.
商河彩钢厂
4)彩钢瓦还有一种连接方式为将固定支架的位置屋面板割开,通过型钢柱连接到屋面钢梁上。
4) The color steel tile also has a connection mode, which is to cut the roof panel at the fixed support position and connect it to the roof steel beam through the section steel column.
以上为主要彩钢屋面的光伏支架布置方式总结,对于穿透屋面的连接件,必须带有防水垫片或采用密封结构胶处理,保证防水能力。
The above is a summary of the layout of the photovoltaic support for the main color steel roof. For the connectors that penetrate the roof, they must be treated with waterproof gaskets or sealants to ensure the waterproof ability.
若彩钢瓦钢架或屋架、檩条、屋面板均不能满足设计要求:原屋面上不能建设光伏电站项目。支架设计前,必须对原有屋面的钢架或屋架、檩条、屋面板等受力构件进行准确核算。
If the color steel tile steel frame or roof truss, purlin, roof panel can not meet the design requirements: the original roof can not build photovoltaic power plant projects. Before bracket design, the steel frame or roof truss, purlin, roof slab and other stress components of the original roof must be accurately calculated.