当前位置:首页-新闻动态 > 行业资讯 >

商河彩钢瓦彩钢板连接器选用标准

来源:http://www.jnqkgjg.com 日期:2019-07-09 发布人:admin

  彩钢板被用于建筑和其他行业,而不是单个使用,它需要许多板连接,可以产生强大的影响,和连接钢板专用配件,所以配件的质量是好的,或连接不稳定等等会导致不稳定的钢板。所以在选择钢接头时,可以按照一定的选择标准。

  Coloured steel plate is used in construction and other industries, rather than single use. It requires many plate connections, which can have a strong impact, and special parts for connecting steel plate. Therefore, the quality of the parts is good, or the connection is unstable, etc. will lead to unstable steel plate. So when choosing steel joints, we can follow certain selection criteria.
  商河彩钢瓦
  Shanghe coloured steel tile
  1、彩钢板结构连接器
  1. Coloured steel structure connector
  (1)强度结构连接器:结构连接器的主要功能是抵抗的吸风,所以连接器本身的拉伸性能,连接器的拉伸性能和承载结构组件连接,和彩色钢板的拉伸性能造成的下吸风的连接器应考虑选择。以上三种情况,往往是第三个表现薄弱环节。一般来说,前两种机械性能只能在选择自攻螺钉和其他连接器时提供。第三种性能与彩板厚度、区域风荷载、建筑形状、钢板材料等有关,不能自连。为了解决这一问题,国外一些公司进行了实验,并用经验公式进行了计算。下面的公式是a公司提出的,供参考。
  (1) Strength Structural Connector: The main function of structural connector is to resist suction, so the connector's tensile properties, the connector's tensile properties and the connection of load-bearing structural components, and the connector with the lower suction caused by the tensile properties of color steel plates should be considered. These three situations are often the third weak link in performance. Generally speaking, the first two mechanical properties can only be provided when selecting self-tapping screw and other connectors. The third kind of performance is related to the thickness of color plate, regional wind load, building shape, steel plate material and so on. It can not be self-connected. In order to solve this problem, some foreign companies have carried out experiments and calculated with empirical formulas. The following formula is put forward by Company A for reference.
  (2)结构连接器的表面处理:结构连接器的使用寿命应与彩板建材的使用寿命相匹配,因此需要对钢连接器进行表面处理。目前,有许多种自攻螺钉,如镀锌、镀铝锌和涂层,然后制成有机涂层。涂层的厚度和涂层的厚度也不同。订货时应根据建筑物的重要性进行选择,供应商应提供标准的技术资料进行选择。
  (2) Surface treatment of structural connectors: The service life of structural connectors should match the service life of color board building materials, so surface treatment of steel connectors is necessary. At present, there are many kinds of self-tapping screw, such as galvanized, aluminized and coated, and then made into organic coating. The thickness of the coating is different from that of the coating. Orders should be selected according to the importance of the building, and suppliers should provide standard technical information for selection.
  (3)的结构密封垫圈配件:配件的一个重要组成部分,它以防止雨水渗透板孔,所以选自攻螺丝的使用寿命提出了密封垫片和密封要求,使用寿命应该匹配颜色板组件的生活,应该有良好的密封性能和抗老化性能。
  (3) Structural sealing gasket accessories: an important part of the accessories, which prevent rain from penetrating the plate holes, so the service life of self-tapping screw put forward the requirements of sealing gaskets and sealing, service life should match the life of color plate components, should have good sealing performance and anti-aging performance.
商河彩钢瓦
  商河彩钢瓦
  Shanghe coloured steel tile
  2、彩钢板结构连接器
  2. Coloured steel structure connector
  施工连接器常用的是攻丝螺钉和铝合金拉铆钉,对其选择要求与结构连接器相同,在选择铝合金拉铆钉时应选择铝合金铆钉,不能选择纯铝铆钉。室外使用时应选用闭孔铝合金拉铆钉,在使用彩板构件时应特别注意密封问题。一般采用密封胶封头,这种方法受施工条件和施工人员的影响,往往不能满足要求,因此建议采用铝合金拉铆钉对配置上具有良好的抗老化性能的密封垫圈。
  Tapping screw and aluminium alloy rivet are commonly used in construction connectors. The selection requirements for them are the same as those for structural connectors. Aluminum alloy rivet should be selected when selecting aluminium alloy rivet instead of pure aluminium rivet. Closed-hole aluminium alloy rivets should be selected for outdoor use, and special attention should be paid to sealing problems when using color plate components. Sealant head is usually used. This method can not meet the requirements because of the influence of construction conditions and construction personnel. Therefore, it is suggested to use aluminium alloy rivets to seal gaskets with good anti-aging performance.
  3.连接器消耗计算
  3. Connector Consumption Calculation
  项目中使用的连接器的类型和数量相当复杂,需要分类进行计算。在初步设计(估算)阶段,一般采用平方米或加长米进行计算;在施工准备阶段,应根据实际消耗情况进行计算,并在计算结果中加入约5%的损失,以弥补施工过程中的损坏、损失和变化。
  The types and quantities of connectors used in projects are quite complex and need to be calculated by classification. In the preliminary design (estimation) stage, square meters or lengthened meters are generally used for calculation; in the construction preparation stage, the calculation should be based on actual consumption, and about 5% of the loss should be added to the calculation results to make up for the damage, loss and change in the construction process.
  商河彩钢瓦
  Shanghe coloured steel tile
  4. 彩色钢板接头的检验和包装
  4. Inspection and Packaging of Coloured Steel Plate Joints
  连接件是给一般专业厂家生产供应,当收到货物由于出厂质量证书,材料表和技术性能的书,当使用,一般不做检查,但到达的产品一盒模型和数量检查应进行规范。连接件的包装,到盒中的连接件应在盒中发货,自产的连接件也采用盒包装,并在盒上注明型号、件数。
  Connectors are for the production and supply of general professional manufacturers. When receiving the goods due to factory quality certificates, material sheets and technical performance books, when using, they are generally not inspected, but the arrival of a product box model and quantity inspection should be standardized. Connectors should be packed in boxes, and those made in China should also be packed in boxes, indicating the type and number of parts on the boxes.
  所以,为了使彩钢板的效果能够稳定、持久发挥,除了钢板本身要选用优良的材料外,其相关部件也要有良好的质量,否则就会受到钢板的影响。因此,在选择钢板时应更加注意接头等质量。
  Therefore, in order to make the effect of color steel plate play a stable and lasting role, in addition to the steel plate itself to select excellent materials, its related components also need to have good quality, otherwise they will be affected by steel plate. Therefore, more attention should be paid to the quality of joints when selecting steel plates.
  以上是商河彩钢瓦小编为大家整理的相关内容,想要了解更多内容,欢迎访问网站:http://www.jnqkgjg.com
  Above is the relevant content of Shanghe Caigang Tile Tile. For more information, please visit the website: http://www.jnqkgjg.com.