当前位置:首页-新闻动态 > 行业资讯 >

夹芯板的分切

来源:http://www.jnqkgjg.com 日期:2019-05-08 发布人:admin

  把夹芯板切成适合的规格是许多装修工程厂商要去做的事,是以便可以更强融入房建,在装修工程流程中防止出现总宽过大的状况,目前的板才还可以依据装修工程规定模切成合适自身的尺寸,这是如何模切的?

  Cutting sandwich panels into suitable specifications is what many Decoration Engineering manufacturers want to do, so that they can be more integrated into housing construction, in the process of decoration engineering to prevent the situation of excessive total width. Current panels can also be cut into appropriate sizes according to decoration engineering regulations. How is this die-cutting?
  1.分切是将宽夹层板分成适合其产品规格的卷。在实际使用过程中,很少有产品会使用得如此之大,因此必须将它们切割成适合该产品的规格。
  1. Slitting is to divide the wide sandwich board into rolls suitable for its product specifications. In the actual use process, few products will be used so large that they must be cut to fit the specifications of the product.
  2、因为夹芯板其独特的表层,对模切规定较为高,选用一般的设施模切,易于对其表层导致凹印或是刮伤等难题。它的模切设施在应用前必须开展清理,避免钢屑、铁销或是别的小废弃物对它导致损害。
                                 商河夹芯板
  2. Because the sandwich board has its unique surface, it has higher requirements for die-cutting. It is easy to cause gravure or scratch on the surface of sandwich board by using general die-cutting facilities. Its die-cutting facilities must be cleaned up before application to avoid damage caused by steel scraps, iron pins or other small wastes.
  夹芯板的分切,能够切割成适合的尺寸,可以融入大量房建,在施工现场要留意它的装修工程方式,恰当对其进行模切,在建筑业中获得运用。
  The splitting of sandwich board can be cut into suitable size, and can be integrated into a large number of housing construction. In the construction site, attention should be paid to its decoration engineering, proper die cutting of sandwich board, which can be used in the construction industry.