当前位置:首页-新闻动态 > 行业资讯 >

商河彩钢厂:怎么鉴定彩钢瓦是否合格

来源:http://www.jnqkgjg.com 日期:2019-04-10 发布人:admin

  越来越普遍的行业开端运用到彩钢瓦产品,那么作为消费者,该怎样查看本人所购置的彩钢板能否合格呢?

  More and more popular industry began to use color steel tile products, so as a consumer, how to check whether the color steel plate I purchased is qualified?
  第一点:查看产品的基板厚度跟覆膜的厚度
  First point: Look at the thickness of the product's substrate and the thickness of the film.
  彩钢是经过基板跟彩色的腹膜组合制造而成,我们先要察看基板跟腹膜镀层的厚度,好一些的彩钢板的基板厚度在0.02mm到0.05mm之间,覆膜或者涂层的厚度普通是在0.15mm以内,不会超越,基板的厚度决议了运用寿命,因而基板厚度很重要,市场上面就有些厂家在基板的厚度方面做手脚,减少基板的厚度,进步腹膜的厚度,经过这样的方式来降低本钱,这样的产品销售价钱自然就会廉价,但是使得彩钢瓦的运用寿命以及性能极大的降低了。
  Coloured steel is made by combination of base plate and colour peritoneum. We should first inspect the thickness of base plate and peritoneum coating. The thickness of better coloured steel plate is between 0.02 mm and 0.05 mm. The thickness of coating or coating is usually within 0.15 mm, which will not exceed. The thickness of base plate determines the service life. Therefore, the thickness of base plate is very important. There are some manufacturers on the market. The thickness of the base plate, reduce the thickness of the peritoneum, improve the thickness of the peritoneum, through this way to reduce costs, such products will naturally be cheap, but make the use of color steel tile life and performance greatly reduced.
  第二点察看彩钢瓦的外漏边缘
  The second point is to inspect the leakage edge of coloured steel tile
  当你手上拿有一块彩钢板产品时分,看看断面是不是成结晶细密的状态,是不是发灰或者发暗以及含有杂质,假如切面是结晶细密型的状态,就阐明质量越好。
  When you have a colored steel plate in your hand, see if the section is in a state of fine crystallization, gray or dark, and contains impurities. If the section is in a state of fine crystallization, the better the quality will be clarified.
  第三点就是听敲击的声音
  The third point is to listen to the tapping sound.
  运用手指或者硬物体敲击彩钢瓦,假如材质比拟差的话,敲击出来的声音就是闷的,没有明显的金属声音,反之则阐明彩钢瓦的质量牢靠。
  Using finger or hard object to knock on the color steel tile, if the material is poor, the knock out sound is stuffy, there is no obvious metal sound, on the contrary, the quality of the color steel tile is reliable.
  消费彩钢瓦的时分,都是采用彩钢压型设备消费加工的,这样可以进步效率跟产量,运用设备的时分一定要留意运用平安。
  When consuming color steel tiles, they are consumed and processed by color steel moulding equipment, which can improve efficiency and output. When using the equipment, we must pay attention to the safe use.
  首先呢,机器设备开机之前要停止细致的检查,检查零部件能否结实,要是螺母呈现松动的话,要及时的停止紧固,还要检查一下机箱内的光滑油能否足够。
  First of all, before starting the machine and equipment, we should stop meticulous inspection to check whether the parts are strong or not. If the nut is loose, we should stop fastening in time, and check whether the smooth oil in the chassis is enough.
                                   商河彩钢厂
  还要就是装置模具的时分,要切断电源,并且还要做好平安防护工作,避免滑座跌落,这样就会形成人身伤害。
  It is also necessary to cut off the power supply when installing the die, and to do a good job of safety protection, so as to avoid sliding down, which will cause personal injury.
  彩钢瓦消费完毕之后,要及时的将彩钢设备清算洁净,不然会招致设备的版面生锈,会影响今后的产质量量。
  After the consumption of color steel tiles is completed, the color steel equipment should be cleaned up in time, otherwise the layout of the equipment will be rusted, which will affect the quality of future production.