当前位置:首页-新闻动态 > 公司动态 >

彩钢板该怎么清洗你知道吗?

来源:http://www.jnqkgjg.com 日期:2019-02-11 发布人:admin

彩钢板即彩涂钢板,是一种带有有机涂层的钢板。彩钢板的种类有许多:单板、彩钢复合板、楼承板等,并且具有重量轻、隔热保温、强度高、色泽鲜艳、装置灵敏方便等特点。这么好的彩钢板我们怎么做好给它的清洗呢!

Coloured steel plate is a kind of steel plate with organic coating. There are many kinds of color steel plate: veneer, color steel composite plate, floor deck, etc., and it has the characteristics of light weight, heat insulation, high strength, bright color, sensitive and convenient device. How can we clean such a good color steel plate?
彩钢板枯燥2—3个小时再涂刷冰漆一遍,再过3小时涂刷第二遍。脊瓦与屋面瓦棱板搭接波谷处可用泡沫堵头填塞防水胶漆两遍,以防渗水泛水。
The color steel plate is dry for 2 - 3 hours, then it is painted with ice paint once, and then it is painted for the second time in 3 hours. The ridge tile and the roof tile edge plate can be filled with watertight paint two times by the foam plug to prevent water seepage.
铲除彩钢板原突出部分用硅酮胶密封,使板缝整齐,施工面要枯燥,清洁干净。遇到搭接处间隙大于5mm—30mm,如果需要加强附着力,请再加用1层耐碱碱聚酯布;再过3小时涂刷第三遍防水胶漆。
The original protruding part of the strip is sealed with silicone glue, so that the seam of the strip is tidy and the construction surface is dry and clean. If the gap between lap joint is more than 5mm-30mm, if you need to strengthen the adhesion, Please add a layer of alkali-resistant polyester cloth, and brush the third waterproof paint in 3 hours.
先用胶漆底涂,再用耐碱聚酯布掩盖涂刷面,紧接再涂刷防水胶漆。拉铆钉及自攻丝钉眼处,可用毛刷粘防水胶漆直接涂盖钉眼四次,厚度约1.5mm左右,直径在 50mm左右,下一次涂刷以上一次涂层不粘手为准。
First primer with glue, then cover with alkali-resistant polyester cloth, then paint with waterproof glue. Draw rivet and tapping nail hole, can be directly covered with brush sticky waterproof paint four times, thickness of about 1.5 mm, diameter of about 50 mm, the next brush above the first coat does not stick to the hands.