当前位置:首页-新闻动态 > 公司动态 >

彩钢瓦这些安装注意事项你知道吗?

来源:http://www.jnqkgjg.com 日期:2019-01-04 发布人:admin

彩钢瓦属于中循环性强,并且符合国家关于新型工业化建造的根本需求,比较于传统的屋面瓦片来说,摆脱了传统瓦片在瓦片寿命以及易碎等短板。

The color steel tile belongs to the medium cycle, and meets the basic needs of the country for the new industrial construction. Compared with the traditional roof tile, it gets rid of the traditional tile in the tile life and fragile short board.
彩钢瓦在房子的装修的使用过程中不容易呈现爆裂的状况呈现,还能削减了房子收缩功用中呈现掉色的状况呈现,在运输装置的技能流程具有避免火焰延伸的处理功用,在规划色彩和样式多种的用途中,满足了各种修建物品中负压的技能过程,成为了自然环境中削减污染的状况呈现。
It is not easy for color steel tiles to burst in the process of house decoration. It can also reduce the fading of color in the shrinkage function of the house. The skill flow of the transport device has the function of avoiding flame extension. In the planning of various colors and styles, it meets the negative pressure skill process of various construction items and becomes the cutting in the natural environment. The situation of pollution reduction is presented.
不论装置什么产品,都有他们自身的一些注意事项,彩钢压型板也不例外,今日小编就为大家介绍一下装置彩钢压型板的注意事项,想要了解的朋友一起跟随小编的介绍看看下面的文章吧。
No matter what products are installed, there are some matters needing attention of their own, and the color steel profiled plate is no exception. Today's edition will introduce the matters needing attention to install the color steel profiled plate for you. The friends who want to know will follow the introduction of the edition to see the following article.
1、由于彩钢压型板侧向衔接有不同方式,为避免屋面漏水,有条件尽量采用暗扣式衔接。屋面板侧向搭接时,搭接宽度应视压型钢板形状、标准而定,一般不小于半波,搭接方向应与主导风向共同。关于波高小于70mm低波纹压型钢板,可不设固定支架,而关于波高大于70mm高波纹压型钢板,最好设固定支架。
1. Because there are different ways of lateral connection of stainless steel profiled sheet, in order to avoid leakage of roof, it is necessary to adopt concealed connection as far as possible. When the roof slab is lapped laterally, the lapping width should depend on the shape and standard of profiled steel sheet, generally not less than half wave, and the lapping direction should be common with the dominant wind direction. For low corrugated profiled steel sheets with corrugated height less than 70 mm, there is no fixed support. For high corrugated profiled steel sheets with corrugated height greater than 70 mm, it is better to have fixed support.
商河彩钢瓦
2、彩钢压型板横向和侧向衔接时均须有牢靠衔接,以避免屋面板发作错动和滑动现象。
2. The cross and lateral joints of color steel profiled panels should be firmly connected to avoid misalignment and sliding of roof panels.
3、考虑到国产密封资料功用较差,易于老化开裂,在施工的时候,其衔接件尽量设置在波峰处,以便防水。
3. Considering the poor function of domestic sealing materials and their easy aging and cracking, the connectors should be set at the wave crest as far as possible during construction so as to be waterproof.
4、彩钢压型板腹板与翼缘水平面之间的夹角不宜太小。
4. The angle between the web and the horizontal plane of flange should not be too small.
5、彩钢压型板横向搭接应与檩条有牢靠衔接,搭接长度须满足标准要求,波高大于70mm的高波纹压型钢板,搭接长度不宜小于350mm, 波高小于70mm的低波纹压型钢板,而且搭接长度不宜小于250mm,且在搭接处须涂密封胶带。
5. The transverse lapping of color steel profiled plate should be firmly connected with purlin. The lapping length should meet the standard requirements. The lapping length of high corrugated profiled steel plate with wave height greater than 70 mm should not be less than 350 mm and low corrugated profiled steel plate with wave height less than 70 mm, and the lapping length should not be less than 250 mm, and the sealant tape should be coated at the lapping place.
以上信息是我们商河彩钢瓦提供给大家的新闻,希望对大家有所帮助如果你想了解更多的关于本行业的信息请点击我们的网站:http://www.jnqkgjg.com
The above information is the news provided by our Shanghe color steel tile. I hope it will be helpful to you. If you want to know more about this industry, please click on our website: http://www.jnqkgjg.com!