当前位置:首页-新闻动态 > 常见问题 >

彩钢瓦常见的涂抹方法你知道是什么吗?

来源:http://www.jnqkgjg.com 日期:2019-02-14 发布人:admin

彩钢瓦的出现给建筑行业带来了很大的方便,人们对于彩钢瓦并不陌生,为了让您更好的运用彩钢瓦。

The emergence of color steel tiles has brought great convenience to the construction industry. People are not unfamiliar with color steel tiles, in order to make you better use of color steel tiles.
下面要带我们对彩钢瓦进行深化的了解。运用涂料对彩钢瓦进行施工时,需求搅拌均匀才没有色差。常常运用的涂改方法就是一填三涂,具体怎样操作下面我们一起了解下:
Next, we need to deepen our understanding of the color steel tile. When applying paint to the construction of coloured steel tile, it is necessary to mix evenly before there is no colour difference. The commonly used alteration method is to fill in three paints, and how to operate it is discussed below.
涂刷之前,需求对彩钢瓦空泛部分进行添补,先运用组成高分子防水涂料对空泛的外表进行涂刷,再运用聚脂无纺布对空泛方位进行张贴。
Before painting, it is necessary to supplement the empty part of the color steel tile. First, the hollow surface is painted with the polymer waterproof coating, and then the hollow orientation is posted with the polyester nonwoven fabric.
底涂是在彩钢瓦衔接的接缝10到20公分宽的方位刷涂防水涂料,要均匀,厚度共同,然后还要检查是否有空泡,有的话就要进行修补,然后就可以进行下一道工序了。
The bottom coating is to brush waterproof paint in the direction of 10 to 20 cm wide at the joints of coloured steel tiles. It should be uniform and have the same thickness. Then it should check whether there are vacuoles or not. In some cases, it should be repaired, and then the next process can be carried out.
中涂是将防水涂料刷在掩盖在彩钢瓦上面的聚酯无纺布上,厚度要均匀,涂膜的厚度要控制在0.4mm左右,外表干了之后,可以尝试着用手触摸外表,看看是否粘手,不沾手的话就可以进行彩钢瓦的第三层涂刷了。
Intermediate coating is to brush the waterproof coating on the polyester non-woven cloth covering the color steel tile. The thickness of the coating should be uniform. The thickness of the coating should be controlled at about 0.4mm. After the surface is dry, you can try to touch the surface with your hands to see if it is sticky or not, and then you can brush the third layer of the color steel tile.
面涂运用彩钢瓦专用的高分子防水涂料,运用油漆刷进行涂刷,均匀的进行涂刷,无流坠。整个涂层的外表会在两小时到六小时刻变干,但是一般需求二十四小时之后才能够彻底变干。
The surface coating is made of a special polymer waterproof coating for coloured steel tiles and brushed with a paint brush. It is uniformly painted without falling. The whole coating will dry in two to six hours, but it usually takes 24 hours before it can completely dry out.
以上信息是我们商河彩钢瓦整理发布希望对大家有所帮助我们 的网站是:http://www.jnqkgjg.com
The above information is our Shanghe color steel tiles collation and publication hope to help you with our website is: http://www.jnqkgjg.com!