当前位置:首页-新闻动态 > 常见问题 >

彩钢瓦的正确铺放方式是什么你知道吗?

来源:http://www.jnqkgjg.com 日期:2019-01-30 发布人:admin

一、彩钢瓦的正确铺放方式:

1. Correct laying of coloured steel tiles:
1、堆叠式(适用于长度≦15M的屋面)
1. Stacked type (suitable for roof with length less than 15M)
2、交错式(适用于长度≧15M的屋面)
2. Interlaced (for roofs with lengths greater than or equal to 15M)
二、彩钢瓦专用钉正确运用方法:
2. Correct application of special nails for coloured steel tiles:
1、彩钢瓦专用钉须打在瓦骨中心才干有防水作用。
1. The special nails for coloured steel tiles must be punched in the center of the tiles to be waterproof.
2、彩钢瓦专用钉固定距离横竖为50CM~100CM(最好4根/㎡)。
2. The fixing distance of special nails for color steel tile is 50CM-100CM (preferably 4 /).
3、专用钉须由瓦的下端往房顶方向打才干有漂亮、密封、规整的效果。
3. Special nails must be struck from the bottom of the tile to the roof to have beautiful, sealed and regular effects.
三、彩钢瓦装置密封条脊瓦封檐盖:
3. Ridge tile eaves cover of color steel tile device:
1、将彩钢瓦密封条分隔两半,对照瓦型压在房顶处盖上脊瓦运用专用钉固定。
1. Separate the sealing strip of color steel tile in two halves, press the type of control tile on the roof and cover the ridge tile with special nails.
2、在彩钢瓦旁边面瓦的交接处,用水泥作密封处理后直接盖上脊瓦,脊瓦底部用小瓦档收尾。
2. At the junction of the tiles beside the color steel tiles, the ridge tiles are directly covered with cement after sealing treatment, and the bottom of the ridge tiles is closed with small tiles.
3、彩钢瓦的下端即屋檐处直接装置封檐盖运用螺钉固定。
3. The lower end of the color steel tile, i.e. the eaves, is directly installed to seal the eaves, and the eaves are fixed by screw.
4、脊瓦交接处,对照接口用剪刀修剪成型后堆叠并运用玻璃胶密封。
4. At the junction of the ridge tile, the control interface is trimmed and shaped with scissors, then stacked and sealed with glass glue.
以上信息是我们商河彩钢瓦整理发布希望对大家有所帮助我们的网站是:http://www.jnqkgjg.com
The above information is our Shanghe color steel tiles collation and publication hope to help you with our website is: http://www.jnqkgjg.com!