当前位置:首页-新闻动态 > 常见问题 >

彩钢瓦安装时有哪些注意事项

来源:http://www.jnqkgjg.com 日期:2019-04-08 发布人:admin

  从名称上就可以看出来,彩钢瓦是彩色压型瓦的简称,重量轻,刚度大,色泽比较丰富,并且施工时候非常的便捷,在抗震、防火以及防雨方面的性能非常的好,今天亿安钢品就为您介绍一下彩钢瓦搭建的房屋在防火当中需要注意的事项:

  From the name, we can see that the color steel tile is the abbreviation of the color pressed tile. It has light weight, large stiffness, rich color, and is very convenient in construction. It has very good performance in earthquake resistance, fire prevention and rain prevention. Today, Yian Steel Products will introduce to you the matters needing attention in fire prevention of the houses built with color steel tile:
  一、亿安彩钢瓦建议在搭建的时候,一定要远离电气焊等等明火作业。
  100 million an color steel tile suggested that when building, we must stay away from open fire operations such as electric welding.
  二、还有就是为了保证彩钢瓦房屋的防火性能,我们建议使用防火性好的岩棉作为芯材,这样的屋墙面防火性能非常的棒。
  Secondly, in order to ensure the fire resistance of color steel tile houses, we recommend the use of rock wool with good fire resistance as the core material, so that the fire resistance of the roof wall is very good.
  三、还有就是要保障热源,火源跟彩钢瓦保持一定的安全距离。
  Third, there is to protect the heat source, fire source and color steel tile to maintain a certain safety distance.
  除了上述的几点以外,还要在屋内配备好灭火器材跟火灾报警器,进一步的保障人员的安全。
  In addition to the above points, fire extinguishers and fire alarms should be equipped in the house to further ensure the safety of personnel.
  彩钢瓦的工程安装要注意事项
  Matters needing attention in engineering installation of color steel tile首先进行的是彩钢瓦的铺放,如果屋面长度小于十五厘米,选用重叠式安装,反之则需要使用交错式的安装方式。
  The first step is to lay the color steel tile. If the length of the roof is less than 15 centimeters, overlapping installation should be adopted, otherwise staggered installation method should be used.
  选用专用钉,使用方法要正确:
  Select special nails and use them correctly:
  1.要将专用钉打在瓦骨的中间,只有这样才能很好的防水。
  1. The special nail should be struck in the middle of the tile, only in this way can it be well waterproof.
  2.专用钉一定要从彩钢瓦的下端向屋顶的方向打,这样的才能够密封、整齐,并且美观。
  2. Special nails must be struck from the lower end of the color steel tile to the direction of the roof, so that they can be sealed, neat and beautiful.
  对于脊瓦的交接位置,需要对照接口使用剪刀修剪成型之后使之重叠并且使用玻璃胶密封,对于突出的部分需要做防水处理,首先要先做好一定的V字型材料,可以选用不同的材料规格,根据实际的情况确定,然后在接水的位置底部上面铺放上彩钢瓦。
  For the joint position of the ridge tile, it is necessary to use scissors to trim the joint and seal it with glass glue. For the prominent part, waterproofing treatment should be done. Firstly, a certain V-shaped material should be made, and different material specifications can be selected. According to the actual situation, the color steel tile should be laid on the bottom of the connection position.
  随着时间的流逝,老旧的建筑需要进行翻新,亿安钢品为大家讲解一下彩钢瓦翻新的施工步骤:
  With the passage of time, old buildings need to be renovated. Yian Steel Products will explain the construction steps of renovation of color steel tiles for you.
  1、将彩钢瓦的底层收拾干净,并且进行除锈打磨。
  1. Clean up the bottom of the color steel tile, and carry out rust removal and polishing.
  2、使用防腐专用底层涂料进行施工,对于彩钢瓦锈蚀特别严重的部位,需要使用重防腐底层涂料进行喷涂的处理。
                                 商河彩钢瓦
  2. Using special anti-corrosion primer coating for construction, heavy-duty anti-corrosion primer coating should be used for spraying treatment of the parts where the corrosion of color steel tile is particularly serious.
  3、使用防腐专用的表层涂料对彩钢瓦进行两遍喷涂,因为成膜厚度在0.32mm。
  3. Paint the color steel tile twice with the special surface coating, because the film thickness is 0.32 mm.
  4、使用刷子进行滚筒涂刷或者或喷涂。
  4. Use a brush to brush or spray the drum.
  亿安钢品专业生产彩钢瓦,型号齐全,质量有保障,亿安钢品凭借先进的生产设备跟精湛的生产工艺,期待Yian steel products specialize in producing coloured steel tiles with complete models and guaranteed quality. Yian steel products rely on advanced production equipment and exquisite production technology, looking forward to